5086 Aluminum Sheet Plate

The 1050 aluminum sheet plate comprises over 99.50% aluminum, classifying it as one of the grades of commercial pure aluminum. It exhibits high plasticity, resistance to corrosion, superior electrical and thermal conductivity, albeit with moderate strength. Notable for its excellent formability, high corrosion resistance, good weldability, and electrical conductivity.

1060 alloy is a high-purity alloy with a content of at least 99.6%. Has excellent weldability, formability, and corrosion resistance. Various forming processes such as impact, cold drawn, deep drawing, and bending can be easily carried out.

The 1070 aluminum sheet plate boasts the highest aluminum content within the 1 series of pure aluminum alloys, reaching an impressive 99.7% purity. It inherits the exceptional thermal and electrical conductivity, corrosion resistance, and superior plasticity characteristics of the 1 series.

1050 Aluminum coil contains more than 99.50% aluminum, which is one of the pure aluminum series. 1050 aluminum coil has the characteristics of high plasticity, corrosion resistance, good electrical and thermal conductivity, but low strength.

1060 Aluminum coil contains more than 99.60% aluminum, which is industrial pure aluminum and belongs to a commonly used series in the aluminum strip series. 1060 Aluminum coil has high plasticity, corrosion resistance, electrical conductivity and thermal conductivity.

1070 aluminum coil belongs to series 1 pure aluminum, containing 99.7% aluminum. It has good electrical and thermal conductivity, high plasticity and corrosion resistance. 1070 aluminum coil cannot be strengthened by heat treatment, its strength is not high, and its machinability is not good, but it can be welded if necessary.

1050 Aluminum foil is pure aluminum foil, content of aluminum is more than 99.5%, which has the characteristics of low density, good electrical conductivity, thermal conductivity and corrosion resistance, is commonly used in the electrical and chemical industries.

1060 aluminum foil is an alloy foil with 99.6% Al content in 1 series pure aluminum products, so it retains the excellent ductility, corrosion resistance, electrical conductivity, and thermal conductivity of pure aluminum.

1070 aluminum foil contains 99.7% Al and is the highest purity alloy foil in 1 series aluminum foil. Therefore, 1070 aluminum alloy foil retains extremely high conductivity and thermal conductivity close to pure aluminum.In addition, it has excellent formability, weldability, corrosion resistance, and anodization.

1100 aluminum tread checkered plate sheet belongs to industrial pure aluminum, and the aluminum content reaches more than 99.00%. Both the 1100 and the 1060 aluminum tread checkered plate sheet cannot be thermally treated, but they have extremely high corrosion resistance, the electrical conductivity and thermal conductivity are relatively good.

1100 aluminum plate is a common industrial pure aluminum alloy plate with an aluminum content of 99%. It is not high in strength and cannot be strengthened by heat treatment.

3003 Aluminum sheet plate belongs to AL-Mn series alloy, which is a kind of anti-rust aluminum widely used. The strength of 3003 aluminum plate is not high (slightly higher than industrial pure aluminum), and it cannot be strengthened by heat treatment.

3004 Aluminum sheet plate is an AL-Mn alloy, which is also a widely used anti-rust aluminum. The strength of this alloy is not high (slightly higher than industrial pure aluminum), and it cannot be strengthened by heat treatment.

3005 Aluminum sheet plate is an aluminum alloy with Mn as the main alloying element, is a kind of aluminum alloy that cannot be strengthened by heat treatment. Therefore, cold working method is used to improve its mechanical properties.

3104 Aluminum sheet plate is aluminum-magnesium-manganese alloy, is a 3-series anti-rust aluminum plate alloy. Its tensile strength is ≥275MPa, and its elongation is as high as 20%. The main alloy components of 3104 aluminum plate are magnesium and manganese, the magnesium content is between 0.8-1.2 and the manganese content is between 0.8-1.4.

3105 aluminum plate is series of AL-Mn alloys, the commonly used tempers are O, H12, H14, H18, H22, etc. 3105 aluminum magnesium manganese plate is a very good rust-proof aluminum alloy, has good electrical conductivity and mechanical properties, good deep drawing performance and tensile strength, excellent corrosion resistance, excellent plasticity and process performance, and has excellent performance in gas cutting and arc welding.

5005 aluminum sheet is an aluminum-magnesium alloy with medium strength, good corrosion resistance, good weldability, good processability, low density, light weight, good heat dissipation, and strong compression resistance. It is widely used in cooking utensils, instrument panels, shells and architectural decorations, interior and exterior materials for building materials, and interior materials for vehicles.

5052 Aluminum sheet plate is an AL-Mg series alloy with a magnesium alloy content of about 2.5%, is the most widely used anti-rust aluminum. 5052 Aluminum plate has the advantages of 3 series anti-rust aluminum plate and the excellent formability of 5 series alloy; It has good corrosion resistance, good weldability, good cold workability, medium strength, good material formability, suitable for various stamping, bending and other sheet metal processing, and good anodic oxidation. It can be oxidized and colored into various bright and bright colors, and is used in mold manufacturing, production of machined parts, etc.

1100 Aluminum coil belongs to the 1 serie alloy, and The aluminum content is more than 99%. 1100 aluminum coil and 1060 aluminum coil are industrial pure aluminum. The strength of 1100 aluminum coil is relatively low, has excellent ductility, formability, weldability and corrosion resistance, electrical conductivity and thermal conductivity, low density and good plasticity; After anodizing, corrosion resistance can be further improved and more beautiful surface can be achieved; however, it cannot be strengthened by heat treatment.

1100 Aluminum coil belongs to the 1 serie alloy, and The aluminum content is more than 99%. 1100 aluminum coil and 1060 aluminum coil are industrial pure aluminum. The strength of 1100 aluminum coil is relatively low, has excellent ductility, formability, weldability and corrosion resistance, electrical conductivity and thermal conductivity, low density and good plasticity; After anodizing, corrosion resistance can be further improved and more beautiful surface can be achieved; however, it cannot be strengthened by heat treatment.